G'day Myron,

Yes, they are compatible with the Big Foot Aluminium Tent Poles, you'll need the 22.2mm size.

G'day Yvette,

Potentially, alothough i dont have any Darche awning poles here to check.
These will fit a pole Outer diameter or either 19mm or 22.2mm.
If you check the diameter of your Darche poles, that should tell you right away.

Hope that helps!

G'day Sheryl,

It depends on what pole you have to begin with.  If it's a pole where the spigot is permanently fixed, you just need to hacksaw a very small amount off the end to put the new one in.

G'day Darryl,

No, these pole spigots are designed to slot into the steel pole itself. The outer diameter listed is the outer diameter of the steel pole that you're inserting the black base of the spigot into.

G'day Lydia,

Unfortunately, as we don't sell Bushranger, we have no way of knowing this. Best bet would be to measure the tube diameter of your awning and go from there.

G'day Robin,

We'd recommend tapping a few crimps into the surface of the pole just below the top of the tube.  

G'day Dudley,

I've just given Oztrail a ring to suss this out for you and they said that for their cabin range of tents, you'd need a 16mm Spigot. This isn't something that we're currently stocking but if you wanted one, feel free to give us a buzz on 1300 914 007 and our customer service team will give sourcing one a red-hot crack for you.