G'day Sally,

Our in-store have just measured this and confirmed the packed stove is 34cm deep, including the stove knobs.

G'day Lou,

I assume you might be looking at the difference between the Deluxe 3 Burner and the 2 Burner High Output Stove?

If so, then the 2 Burner High Output has a much higher overall output, of 25,000 BTU per burner, while the Deluxe 3 Burner has two burners that are 8600 BTU, and one central burner that is 6400 BTU.

G'day Barry,

No, the Deluxe 3 burner stove won't work if you try to run it through a regulator. You can run it from a 4kg POL LPG bottle, you'll just need the POL to 3/8" BSP adapter.

G'day Andrew,

I've just checked this for you and I can confirm that the Deluxe  3 Burner Stove will fit in the Hyperflame Stove Carry Bag. This is the only current bag we have that will fit this stove.

G'day Daniel,

The Companion Deluxe 3 Burner Stove is a High-Pressure stove, but you'll be able to use it with a swap and go bottle by attaching an adapter to the end of the hose. The stove itself has an adjustable temperature control so the heat can be varied. The central smaller burner will be the best option for simmering.

G'day Sharon,

The Campfire 3 Burner Gas Cooker Plate is the best option we'd have for your stove. It will be a little shorter than the stove but will cover the majority of the 3 burners. 

G'day Naman,

If you wanted to use a Gas Safety Gauge and a 9kg gas bottle with the Primus Deluxe 3 Burner Stove you certainly can. You will just need this adapter to use between the hose and the gauge.

G'day Mike,

The Oztrail 3 Burner Stove & BBQ Plate Bag would be the best option for fitting the Primus Deluxe 3 Burner Stove inside. 

G'day Mike,

Rest assured, it'll work fine. I've just given it a quick whirl to be sure. Even though the bag isn't quite long enough, because it's deeper and wider than it needs to be, the bag morphs around the stove quite comfortably. 

G'day Rob,

The hose you'll need for your Primus Deluxe 3 Burner Stove is the Companion High Pressure 3/8" Coarse Thread Gas Hose. At the moment, we've not got them online but we will hopefully shortly. If you wanted to grab one, just give us a buzz on 1300 914 007 and our customer service team can give you a hand over the phone. 

G'day John,

I'd recommend using a stove stand or using something to create a little more distance between your table and your Primus Deluxe 3 Burner Stove, I just think you're better off erring on the side of caution. As for cleaning it, it doesn't come apart to allow you to get under the drip tray, no, but I there is a lip near the edge, so I think you'd be pretty unlucky to ever get any spills in underneath the stove. 

G'day Paul, 

We've only got one stove stand available at the moment which is a 2 burner size from Zempire. At this time we actually don't stock a stove stand that will accommodate the length of a 3 burner stove. 

Your best bet would be a small table that can withstand heat, just to be on the safe side - as if the stand is too small it may unbalance the stove when in use. 

G'day Michael,

We do have a 1.5m Primus hose that fits a 9kg bottle with a POL fitting that will fit on your Primus portable stove. It can be found on this link: https://www.snowys.com.au/cylinder-hose-kit-pol Cheers!

**Update to this one, the link above is for a different hose! You can use this stove with a 9kg has bottle using this adapter