G'day Hilary,

Oztent states this is waterproof with a rating of 1500mm.

G'day Anthony,

No, the side awning isn't compatible with the RX range, due to the continuous zipper used on the complete panel system.

G'day Mj,

We've previously indicated that they are compatible, but we've had our wires crossed with Oztent sorry!
The side awning is not compatible with the RV Plus range.

G'day Jerome,

I've spoken to Oztent and they've indicated the Eyre & RV series are not compatible.
We've never sold the Eyre, so unfortunately cant provided any real life feedback.

G'day Debbie,

There is velcro on the side awning that is designed to attach to the velcro of the storm flap on the tent. You could try adapting it to fit your RV1, however, the velcro might not be strong enough to hold it in place.

G'day Toni,

There is no specified UV rating on the Oztent Side Awning.

G'day Darryl,

Yes, you can connect the side awning directly to the RV5 awning in either the flat or peaked configuration

G'day Penny,

Unfortunately, Oztent no longer makes the side panels compatible with the Oxley tents. The zippers on the Side Awning are a little different so unfortunately won't attach to your Oxley. If you're looking to add some panels we'd suggest contacting a local canvasware shop that might be able to make you some custom panels. 

G'day Den,

You can use the Side Awning as a bit of a windbreak, there are eyelets on the ends that you could attach the guy ropes through and drop the side down a little to block the weather from just one side.

G'day Den,

The Side Awning (RV2-5) is not compatible with the RV1 unfortunately. The zip tracker for the RV1 peaked side panels starts at the end of the awning and zips back towards the tent, whereas the Rv2-5 side awning attaches using the zip tracker starting at the tent side, so the zipper will be in the wrong spot to set it up.

G'day Simon,

As far as we can tell the Oztent Side Awning won't work with the Turbo 240 tent. Have you had a look at the Turbo 240 Extenda Awning? This should do the trick depending on the exact configuration you're after.

G'day Den,

Ben and I have just tried this out for you but unfortunately, it won't work. The zip tracker for the RV1 peaked side panels starts at the end of the awning and zips back towards the tent, whereas the Rv2-5 side awning attaches using the zip tracker starting at the tent side, so the zipper will be in the wrong spot to set it up.

G'day Den,

Sorry mate but these are only available as you see it on our website, so you'll have some new poles to add to your collection!

G'day Sarah,

I wasn't too sure about this so I gave Oztent a call. They told me that the Oztent Side Awning for the RV4 isn't compatible with the RX-4 but that there will be side awnings coming out in time for the RX-4. 

G'day Ryan,

If you've got an RV2 Tent, then you'll be able to connect the Oztent Side Awning to the front of your awning. If you've got another size, then it won't fit I'm sorry to say.

G'day Mick,

This little beauty attaches to either side of the RV tent awning.

G'day Christo, 

I've just spoken with Oztent, and they've said that the Side Awning doesn't have a zipper on the far end so you won't be able to attach it to the Foxwing awning unfortunately. 

G'day G,

Good question - from what I can determine from looking at our display tent, there is only one zip option for each side, which means you can put either the side or the awning but not both.

G'day Annie,

It's not something that Oztent have made us aware of as far as any upgrades to their Side Awnings but we'll make the suggestion to them.