If the pole in your swag snaps, then don’t stress – if you’ve got the Segmental Dome Swag Pole Repair Kit from Darche on you, you’ll be able to have it up and running again in no time.
This kit can be used to repair a pole of any 700mm – 1400mm wide segmental dome swag and comes with the shock cord, alloy poles, ring stoppers, a tube cutter and instructions included.
Patch up your swag when on the road with the Segmental Dome Swag Pole Repair Kit from Darche.
Suitable to repair 1 pole
Suits any 700mm-1400mm wide arch dome swag
Includes: 2 x 895mm alloy poles, 1 x 500mm alloy pole (with male end), 1 x 500mm alloy pole (with female ends), 2 x alloy elbows, 1 x tube cutter, 1 x 3m shock cord, 2 x ring stoppers and instructions
External Dimensions:
2 x 89.5cm Alloy Pole | 1 x 50cm Male Alloy Pole | 1 x 50cm Female Alloy Pole | 300cm Shock Cord
Weight:
0.32 Kg
Material:
Alloy
Warranty:
1 Year
Supplier Code:
T050801067
Snowys Code:
142683
Reviews
(0)
Q&A's (3)
Diameter of the poles1 answer
Hi. What’s the diameter of the poles?
Adrian - Success, WA(4 years ago)
G'day Adrian,
Darche uses 9.5mm Alloy Poles in their swag range, so this kit will suit 9.5mm poles.
Leece - Snowys(4 years ago)
Will this repair 23zero Bandit swag poles?1 answer
??
Sarah - Woodford(4 years ago)
G'day Sarah,
It's possible that they would fit, however, unfortunately, we have no stock to physically check the diameters match up. I'd recommend grabbing a replacement pole directly from 23Zero to be sure it will fit you Bandit.
Leece - Snowys(4 years ago)
Will it suit Wild Country swag pole1 answer
I have a fibreglass wild country brand pole that has broken on the head end of the swag dome. Total length 164.5 cm 20mm diameter Aluminium section spacer 6.5cm And it comes apart into two lengths Can I use this as a replacement? Can it be cut down to fit? If not can you suggest another type please?
Andi - Chelsea (4 years ago)
G'day Andi,
Theoretically, you could use this kit to build yourself a new head pole, however, you won't be able to use it to repair your existing fibreglass poles. The kit comes with a small cutter to cut the aluminium tube sections down to size, so you should have enough lengths to make yourself a pole of 164-165cm.