Simple to set up and use, the reliable Smarttek Lite from provides instant hot water from a small and light unit and is ideal for compact camp or caravan setups in warmer climates. The smaller heat exchanger and burners won't raise the water temperature as far above ambient than its bigger sibling but saves a little on packed size and weight.
This sleek design is just 30cm x 37 cm, weighs 4.5kg and has been tested over 12,000 cycles to ensure durability. To set it up and use it, hang it by the mounting brackets or handle, connect the gas bottle using the gas regulated hose, connect the shower rose and rose to the water outlet valve, connect the water source to the water inlet valve, insert the two included batteries provided - and you’re all set for hot water out in the field.
This unit provides 4.3L per minute of constant water flow with the included pump and up to 6L per minute maximum with an optional larger volume pump, has an LCD temperature display for setting the temperature, a 2 pressure setting shower head with twist on/off control, and a stainless-steel finish so it can hold up in the harsh Aussie climate. When you need dependable and portable hot water, the Smarttek Lite from Smarttek is the perfect entry-level option.
Easy to set up and use
Up to 4.3L of water flow per minute with the included pump
Unit is capable of a maximum of 6l per minute with larger pumps
Stainless steel finish with stainless steel screws and double powder coated rear housing
Dust, wind, rain and shock resistant
LCD temperature display
Showerhead with 2 pressure settings and twist on/off control on the shower head
Battery powered ignition
Inbuilt energy saving function
Temperature safety cut-off switch to prevent scolding
Technical support available from 9am-7pm 7 days per week - 1300 119 906
2m 8mm Suction to pump | 2m 8mm Outlet from pump | 1/2" BSP fitting
Cable Length:
2.5 Metres with On/Off Switch & Two Alligator Clamps
Material:
Heater: Stainless Steel, High Grade Stainless Steel Screws and Double Powder Coated Rear Housing | Pump: Metal Shell & Corrosion resistant ABS
Pump:
4.3 L/pm | 12V DC | Pumps up to 10m with maximum 3m rise
Fuel Type:
LPG Propane
Fuel Consumption:
Winter Mode: 28 Mj/h | Summer Mode: 9Mj/h
Ignition:
Automatic
Gas Fitting to Appliance:
3/8" SAE | 1200mm Regulated Hose Included
Gas Fitting to Bottle:
LCC27
Input Power:
12V DC
Batteries:
2 x D Cell for Ignintion (Included)
Run Time:
Summer Mode: 50 Hours from a 9 Kg LPG Bottle | Winter Mode: 16 Hours from a 9 Kg LPG Bottle
Max. Heat Output:
Just under 35°C above ambient (Min water, Max Gas, Winter Mode) | 52°C Maximum
Flow Rate:
Up to 4.3 L/pm with included pump | Up to 6L/pm maximum with optional larger volume pump | Min. flow 2L/pm
Water Pressure:
Min: 25kPa − 3.63 psi | Max: 750kPa − 108 psi
Warranty:
1 Year Parts & Labour | Additional 2 Year Optional
Supplier Code:
SMA-LTE
Snowys Code:
144729
Staff tip:The Smarttek Lite is supplied with an LCC27 Type 27 gas cylinder connection. This will only connect to a 4kg or 9kg gas cylinder with an LCC27 Type 27 cylinder valve. This connection will NOT connect (screw−in) to the old POL Type 21 gas cylinder valve.
These are not designed to be permanently installed anywhere, Dale, and they need to be used in a well ventilated space, so they won't be suitable inside a motorhome.
Ben - Snowys(1 year ago)
Is the stand included 1 answer
Does this Smartec lite include the stand in this package?
Deb - Para Hills West (4 years ago)
G'day Deb,
Smartek hasn't included The Smarttek Tripod Stand in this package but it is available separately. You can find it through this link HERE.
Susie - Snowys(4 years ago)
Mains water1 answer
Can you connect mains water tap directly to the unit?
Paul - Parkinson(4 years ago)
G'day Paul,
Yes you can connect the Smarttek Lite to mains water using standard garden hose fittings.
Leece - Snowys(4 years ago)
Heater unit only1 answer
Hi, can you purchase the heater unit only, as I already have a pump and shower head.
David - The Gap(4 years ago)
G'day David,
We're only able to get our hands on these units with the whole package that includes the heater unit, hoses, pump, and showerhead.
Leece - Snowys(4 years ago)
gas bottle connections?1 answer
Can you connect the Coleman 1 pound green bottle to this instead of a large gas bottle? Thanks
Marcus - Freshwater(5 years ago)
You'd need a BOM to 3/8 SAE hose plus a regulator in the system. I don't know of anything available 'off-the-shelf' for this sorry, Marcus. Whether or not it can be done is a question for a professional gasfitter, unfortunately.
Ben - Snowys(5 years ago)
My smartteklite is only reaching 28 degrees, currently 12degrees outside, is there an adjustment I can make for it to reach max temp1 answer
Purchased smartteklite new, can’t get it to reach a temp any higher than 28degrees regardless of ambiant temperature.
Michael - Boneo(5 years ago)
I reckon there would be a simple solution to this, Michael, and the quickest way to get an answer would be to call Smarttek themselves on 1300 119 906. They can usually troubleshoot these things over the phone.
Ben - Snowys(5 years ago)
What is the difference between this and the black.1 answer
Hi, What is the difference between this and the black? Can you run a bigger volume pump without problems? Thanks in advance
Chris - Yeppoon (5 years ago)
G'day Chris,
There are a few key differences between the Lite Smart Hot Water System and the Black Smart Hot Water System. The key is the different size pumps, but the maximum heat output also varies slightly, with the Lite unit being able to bring water 35'C above ambient, and the Black 42'C above ambient. The overall warranty on the unit is also 12 months, versus 3 years. You can purchase the 6L pump separately to use with the Lite unit too if you wish.
Leece - Snowys(5 years ago)
Pump Connections1 answer
We have the Yetti 400, what power connections, if any, will I need for the pump?
Benny - Fernvale(5 years ago)
G'day Benny,
Great question! You'll need to take a look at the Smarttek Multi Cable Pack, which will give you great versatility connecting to a range of power sources. With the Goal Zero Yetti 400 the 12v attachment cable will be the way to go. hope that helps.
Lauren - Snowys(5 years ago)
Water hose connection1 answer
Can I use normal 12 mm garden hose & connectors to supply water in and take water out of the Smarttek lite .
Ray - Mansfield Vic(5 years ago)
G'day Ray,
We've just double-checked this for you, and yes the fittings on either side of the pump are your standard garden hose connectors.
Leece - Snowys(5 years ago)
3/8 gas bottle option1 answer
Hi guys, I read that it has a pol connection to the gas bottle. Any options for using the 3/8 bottle?
Lance - Port Kennedy(5 years ago)
G'day Lance,
The Smarttek Lite Hot Water System comes with hose that has a POL connection so if you're wanting to use a smaller 3/8" BSP bottle then just grab a 3/8"BSP LH to POl Adapter.
Leece - Snowys(5 years ago)
Does it run on town gas?1 answer
I have town gas plumbed in my back yard and am looking for a portable unit like this to use for an outdoor shower. Thanks
Sim - Sydney(6 years ago)
G'day Sim,
The Smarttek Lite Smart Hot Water System is designed to run on LP Gas, so, unfortunately, you won't be able to plumb this unit into your town gas supply. You can run this unit off your BBQ style gas bottle though, so should be perfect for an outdoor shower with the right setup.
Leece - Snowys(6 years ago)
Does it pump up water1 answer
Does this system pump up water from say a jerry can? Thanks
MaRtin - GLENLYON(6 years ago)
G'day Martin,
Yep! This system can pump water from a jerry, tank or other watersource, as well as being connected to mains.