With the latest technology, the Coleman HyperFlame FyreCadet gas camping stove has revolutionized camp cooking with a new burner design and WindBlock pot support that opens up space for larger pots.
Perfect when you just need maximum output for boiling water or to cook on high heat, and easy to clean thanks to removable pan supports and the Coleman SwapTop system that enables a combination of cooking surfaces to be used on the stove at the same time.
A streamlined design with a secure lid latch, anti-skid feet and independently adjustable flame control with a total output of 22,000 BTU’s, the FyreCadet is made to deliver a fast and hot cooking solution wherever you set up camp.
Are these stoves compatible with the Coleman Eventemp griddle.
Ali - West Haven, NSW(3 years ago)
G'day Ali,
Due to the significantly higher BTU and heat output of the Hyperflame stoves, it is recommended that you use the HyperFlame specific griddle. The Eventemp or other non-cast iron hotplate will potentially buckle and warp.
Lauren - Snowys(3 years ago)
High or low pressure stove1 answer
Is this a high or low pressure stove? Wanting to be able to attach a longer gas hose, and the hose length restrictions for high pressure burners has narrowed down my options of cook top.
Maddy - Lennox Head(4 years ago)
G'day Maddy,
These stoves can be categorised as a high-pressure stove, they do have a built-in regulator, however it isn't the same style as the larger 2.8kPa regulators used on Low-Pressure stoves. The longest hose for these stoves is 1.5m long.
Leece - Snowys(4 years ago)
Support for disposable cylinder1 answer
If I use this with a disposable cylinder do I need to support the cylinder or can it just hang off the end of the regulator suspended in mid air? I am asking because if I use a stove stand (folding lightweight wire type) there is nowhere to put the disposable cylinder.
Lynne - Canberra(4 years ago)
G'day Lynne,
The regulator arm will need to be supported if you're running it from the disposable cylinders so Campfire Stove Stand, unfortunately, won't suit. We'd recommend checking out the Easy As Stove Stand if you're wanting to use the stove with the disposable cylinders.
Leece - Snowys(4 years ago)
Must this stove be used outside only?1 answer
We are putting in a new kitchen and my stove will be removed. We need to buy a portable stove to use inside in the meantime.
Susan - Llandilo nsw(4 years ago)
G'day Susan,
Yes, all of LP Gas stoves that we sell are designed for outdoor use only.
Leece - Snowys(4 years ago)
Is it OK use for 9 kg LPG bottle?1 answer
Is it OK use for 9 kg LPG bottle? (add adaptor to collect 9 kg LPG)
Ha - 4109(4 years ago)
G'day Ha,
Yes you can use the HyperFlae FyreCadet Stove with a 9kg gas bottle, you'll just need a POL to 3/8" BSP adapter.
Leece - Snowys(4 years ago)
Lid remove and bag1 answer
Hi two questions, is the lid easily removable? Or fold 180’ Second does it come with any sort of bag? (They all should)
Russ - Baulkham Hills(5 years ago)
G'day Russ,
The lid on the Hyperflame FyreCadet can't be folded down flat to 180'. It should be possible to remove the lid, however you wouldn't be able to remove and reattach the lid easily so it's not something we'd recommend. The stove doesn't come with a bag, but you can purchase a bag separately here.
Leece - Snowys(5 years ago)
Heat Reduction 1 answer
Hi Guys, I purchased a Fyrecadet and having a bit of trouble with it... it’s heat is too hot for low heat cooking. I use a thick cast iron pan and have a Colman grill plate but even on the lowest heat it burns the outside of food but not cooked through. Is there a way to reduce the heat?? I was thinking a different regulator attached to an lpg cylinder... would that work?? Cheers Mark
Mark - Inverell (6 years ago)
G'day Mark,
The HyperFlame FyreCadet packs a fair punch and therefore we have had a few reports of it being a little too hot if you're trying to simmer. Unfortunately, there is no other regulator that will work with the unit to reduce the heat output.
Leece - Snowys(6 years ago)
plate 1 answer
Hi can you get a plate or griddle to fit the cadet thanks
chris - belmont(6 years ago)
G'day Chris,
Coleman does make a nice, matching griddle with built-in grease cup for the Hyperflame stoves. You can view that by clicking here.
Tim - Snowys(6 years ago)
Coleman s Burnzomatic disposable cylinders1 answer
Hi
I know Coleman make the 453g single use cylinders but have also seen the burnzomatoc brand. Are they the same/ interchangeable?
Caroline - Denistone West(7 years ago)
G'day Caroline,
We haven’t heard of that brand/name in particular, but with gas cylinders, as long as it is propane gas and has the correct fitting - then you should be able to use it with the Hyperflame stove.
Emily - Snowys(7 years ago)
Can you please tell me the dimensions of this stove. 1 answer
Hyperflame fyrecadet camping stove
Darryl - Moe(7 years ago)
G'day Darryl,
When the Coleman HyperFlame FyreCadet Camping Stove is packed up, it is 60L x 38D x 13H cm. When in use, it is 60L x 45D x 39H cm.
Ben - Snowys(7 years ago)
is there any options to exchange the regulator that extends directly from the unit to something that connections to my lpg cylinder?1 answer
is there any options to exchange the regulator that extends directly from the unit to something that connections to my lpg cylinder?
miles - hobart(7 years ago)
G'day Miles,
Unfortunately, there are no other options that we're aware of. The regulator is a design frustration of what is otherwise a very impressive stove. We have shared this feedback to Coleman numerous times and will do so again.
Ben - Snowys(7 years ago)
Are the feet removable and what is the height without the feet?1 answer
Hi are the feet removable and if so what would be the stored height without the feet?
Rick - Toora(8 years ago)
G'day Rick,
I've just had a look at the display, and it seems that the feet on the FyreCadet stove are not removable.
Emily - Snowys(8 years ago)
Can I use the hose that is supplied with the Fyrecadet straight on to a 9 kg gas bottle? Or do I need to get another hose with a regulator?1 answer
Chris - DARWIN, NT(8 years ago)
Hi Chris, you can use the supplied hose with your 9kg gas bottle, you'll just need to get an adaptor for your POL fitting. Search Snowys code 20610, that's the one you need.
Lisa - Snowys(8 years ago)
Difference between fyreknight and fyrecadet1 answer
I will be a lone camper i usually cook at home on a one pot menu.
which sys will suit
Michael - ELIZABETH EAST, SA(9 years ago)
Apart form the colour there are two main, but subtle differences between the two Michael. The FyreKnight burns a little hotter, and has a larger tougher casing/exterior which allows for bigger pots. For your purpose the FyreCadet would be more than suitable.
Ben - Snowys(9 years ago)
What gas bottles can be used with this?1 answer
Can the Coleman green bottles be used with this cooker?
Sam - Tasmania(9 years ago)
Hey Sam, the Hyperflame Stoves come with a regulator to suit the disposable lightweight LPG canisters (sometimes referred to as a BOM fitting), they also come complete with a hose that fits between this regulator and a 3/8 BSP fitting gas cylinder. Should you wish to use a cylinder with the larger POL fitting such as your pkg BBQ bottle, then you can purchase an adaptor (item code 20610 on our website) to make this happen.
Ben - Snowys(9 years ago)
Could you give me the dimensions of the burners and whole unit?1 answer
Renee - Heidelberg(9 years ago)
Hi Renee, thanks for asking. The actual burner is 10cm in diameter, while the pot support is 21cm in diameter. The whole stove is 59 x 37 x 13 cm. I hope this helps! If you've got any further questions feel free to give us a buzz on 1300 914 007.
