G'day Ann,

The cable is a standard USB A to Micro USB cable which is common across alot of different appliances.
You should be able to pick one up from Officeworks, Department store, or possibly even a servo.

Hope that helps!

G'day Colin,

The pump the draws water is inside the actual tap housing.
As long as the waterline is higher than the intake hose, you should be fine!

G'day Teena,

You can get a longer hose for this, we don't sell them but you can find them at your local hardware shop, you just need a generic 5mm Food Grade Tubing to your desired length. 1 longer hose would likely give a better connection than 2 joined together but both are possible.

G'day Jessica,

We dont have small calipers to measure this exactly, but its basically 5mm.
Hope that helps!

G'day,

No, there's not.  You can potentially come up with a DIY solution, or even drill a small hole through the jerry can lid to thread the tap hose through, but the hose & attachments arent universally jerry can compatible.

G'day Lindsay,

Thats an excellent question, they;re not something that we have access too but you may be able to pick a few up from Dometic directly.
Head here to find their Customer Support number, or a contact form.  
Hope that helps!

G'day John,

Yes, the base of the Faucet is magnetic, so it will work in the scenarios you mention. Just be sure to double check your stainless steel is magnetic, as not all types of stainless steel are!

G'day Teresa,

The hose is around 40cm long but we have had feedback from customers who have used an alternative hose up to 3m long, which still worked beautifully.