G'day Terrance,

Yep, it does - you'll need to loosen the locking ring to adjust the position, but you shouldn't have any issues setting it up the way you need.

G'day Michael,

We've had questions about phone compatibility before.  The maximum specified phone width is 8.25cm. 
So you'll just need to measure up the width of your phone, including any covers...if it's less than 8.25cm wide you should be fine.

G'day CHad,

You can, but not from us.  We only have a very small range of RAM instock, but somewhere like the online retailer Johnny Appleseed has loads and loads on RAM parts if you need to customise the mount you have.
You'll be wanting the B size parts, they're the 1" ball which line up with what you've got.

G'day Ben,

We're not too sure if this Ram Mount will fit your Hema HX-1. However, the maximum specified phone/device width compatible with the mount is 8.25cm. Hopefully, this helps.

G'day Genevieve,

The rubber tethering device is included if you plan to use the X-grips on a motorcycle mount, to add some extra security for your device. For general car driving, you shouldn't need to use it, for rough 4WDing, you might find it helps to hold it in place. The glue is supplied so you can glue the rubber caps to the X-grip arms if you don't wish to have the need to remove them.

G'day Gen,

The Suction Cup Mount needs a non-porous surface to mount to, so generally, your dash will be too uneven and not smooth enough for the suction cup to mount to it.

G'day Jay,

G'day Matt,

The maximum specified phone width is 8.25cm, I've had a look at dimensions for an iPhone 8 Plus model, and based on that you shouldn't have any troubles.

G'day Joel,

I've just had a quick look into the specification on RAMs website, and they've advised the RAM Mounts
Twist Suction Cup Mount & Phone Cradle is compatible with the iPhone 11.  There's no further fitting advice based on different covers, etc.  We do know that an iPhone Pro Max does not fit, so might be worth checking the overall dimensions of your phone with the dimensions of that model.
Hope that helps!

G'day Michael,

The maximum specified phone width is 8.25cm. 

G'day Amit,

I'm not familiar with that model, but comparing the size dimensions online to other models that we know will fit then I think you should be fine!

G'day Wenfeng,

Yes, the iPhone 6S Plus will fit in the RAM Mount Phone Cradle.

G'day Damien,

Yes this should fit your Pixel 4XL phone, they suit the iPhone 8 which is listed as the same as the width as your phone.

G'day Yonna,

I've just double-checked the listed specifications and Ram indicate that this model can be used with the iPhone 11 Pro, but not the iPhone 11 Pro Max. You might need to find a supplier who carries the large version of the mount. 

G'day Graham,

Yes the iPhone 8 will fit with no problems at all.

G'day Martin,

Yes the Twist Suction Cup Mount & Phone Cradle suits the iPhone 7 with no worries at all.

G'day Sue,

Unfortunately not, the cradle won't open up wide enough to fit your Ipad Mini. RAM do make an Ipad mini cradle mount, however, it's not something we currently range, so your best bet might be to check out one of the other Australian RAM Mount sellers, there are quite a few who sell all sorts of combinations.

G'day K,

Yes, Ram Mounts are very flexible, the central Socket Arm can be loosened and a different fitting attached instead of the suction cap. We don't sell the individual parts, but there is a supplier in Sydney who should be able to supply a motorcycle mount for you. Check out rammount.com for their international distributor list.