G'day Debbie,

Unfortunately, these aren't really suitable for the single burner butane stoves. The stove really needs to be wider than the stand so that it sits flat on either side. I'm sure the stand or stove could be adapted to work, but off the top of my head, I don't have any great suggestions here sorry. 

G'day Mark,

I've just given this a whirl with our display model and you'll have no worries at all using a Zempire Stove Stand with your Coleman Eventemp 3 Burner Stove. 

G'day Jodie, 

I've just given this a try with our display model. You'll have no issues at all with your Fyreknight Stove on the Zempire Stove Stand.

G'day Jake,

I've just double checked our display model of the Zempire Stove Stand and can confirm that the weight limit on the label says that it can hold up to 30kg.

G'day Matt,

We don't have the Coleman Dual Fuel 2 Burner stove currently in stock so I can't physically check this, but after referring to its dimensions, there should be no issue getting it to fit on the Zempire Stove Stand.

G'day Lauren,

There will be no worries fitting the Zempire 2 Burner Deluxe with Grill on the stand as the stove just overhangs the width of the stand. This is the case for all stoves which allows for keeping the stand as compact as possible.

G'day Sheree, 

I've just tried the Gasmate 2 Burner with Grill on top of the Zempire Stove stand myself in store, and it seems to be a good fit Sheree. 

G’day Shaun,

I’m not entirely sure about how it packs up, but as far as I know the stove does fold flat. I can’t seem to find our display model, and Zempire are closed at the moment as their in NZ, so I will give them a call about that query tomorrow and get back to you.  

All of the Zempire stoves which are compatible with this stove stand are approximately 50cm x 35D. Generally 3 burner stoves will be at least 10cm longer than that, so it might be a stretch. You don’t want overhang because it won't be stable once you put pots etc on top. 

Hi Shaun, 

I've found the display model, and it turns out that the shelves of the Zempire Stove Stand just fold up - so they don't clip onto each other. 

G'day Josh, 

I’d say that the 2 Burner High Output Stove is probably pushing it, as it’s 63cm long so there will be 10cm overhang on either side.

If you centralise the stove on the stand, and are careful with how much weight you put on top of it then it should in theory, be fine. 

But just keep in mind that you should be careful as ideally you want the stove stand to be close in size to the stove. 

G'day Dennice, 

This stove stand is 43cm wide in use, and has a weight rating of 30kg - so it's going to be compatible with stoves that are around that size.

For example the Zempire 2 burner stove measures 46.5L x 32W x 9.5H cm and that model fits really well on this stand - so I'd compare those dimensions with your stove to see if it's a good size.