When you’re heading away on an adventure, chances are you’ll need to keep your trusty gas bottle secure, which is where the Camper Trailer 4.5kg Gas Bottle Holder from OZtrail comes in.
This holder is made from durable galvanized steel and is adjustable and lockable for your peace of mind. It also features an insulating trim to reduce vibrations and is suitable for separately available 4.5kg size cylinders.
Secure your gas bottle on the road, with the Camper Trailer 4.5kg Gas Bottle Holder from OZtrail.
Galvanised steel construction
Adjustable and lockable
Insulating trim to reduce vibrations
Suits 4 and 4.5kg bottles
In Use Dimensions:
29.5W x 28D x 19.5H cm
Packed Dimensions:
29.5W x 28D x 19.5H cm
Weight:
2.2 Kg
Material:
Galvanised Steel | Powder−coated Steel | Rubber Trim
Warranty:
1 Year
Supplier Code:
CCTA-GBH45-D
Snowys Code:
132861
Reviews
(2)
2.52
Q&A's (2)
Hi Guys, is there a version with the hinge and clasp on opposite sides1 answer
ie. swings open to the left?
Bruce - Eumundi(5 years ago)
G'day Bruce,
The OZtrail 4.5kg Gas Bottle Holder is only available in the model we have here. I have checked with OZtrail and they only offer this option and a 9 Kg version too. If you are handy with an angle grinder and a welder, this Gas Bottle Holder could be modified to suit your needs however, this would void the warranty.
Jake - Snowys(5 years ago)
Can I use this with the 3.7kg swap-and-go bottle?1 answer
I use the swap-and-go 3.7kg bottle but am having trouble finding a holder to suit. Also, can I side-mount this? Is the holder strong enough if I attached it on the side and cantilever it?
Brad - Warriewood(5 years ago)
G'day Brad,
I've just had a look at the Gas Bottle Holder and there is some degree of variability in the overall diameter of the holder. The clasp to shut the holder has a screw thread on it, so the smallest diameter is 25cm, and the largest diameter is 26cm. There are two mount holes on the back of the holder that are 16cm apart, however, there is no indication about the best way to mount these, so my suggestion would be to use the supplied mounting holes and mount it wherever suits, but I think the best option might be to mount with a flat base underneath the holder.
