Thanks to the Hard Korr 3 Strip Tri-colour LED Awning Kit, attaching permanent 12V lighting to your vehicle awning will simplify your setup and save time
Designed to illuminate the area under all common 180° or 270° awnings, you can leave these lighting strips attached to the folding awning bars when stored. The length of the included cables has been optimised to reduce excess and the 12V 1.5 metre power lead gives you the option to plug the lights into any 12V plug on your vehicle.
The light strips combine to pump out an impressive 3300 lumens to easily light any awning area while heavy duty insulated cables prevent voltage drop – resulting in brighter bars and less power draw. You could leave these lights on all night with complete confidence that they won’t discharge your deep cycle battery. Change your light levels and beat the bugs with Hard Korr’s exclusive tri-colour dimmer switch (included). Light up the night in bright white, relax with warm white, or keep the bugs at bay with the orange light setting. Control the brightness with a smooth and incremental dimming function to set the light level just the way you like it.
Made tough, like all Hard Korr products, the trimmable strips feature genuine OSRAM® LED chips, a high grade UV resistant silicone outer, and tough 3M double sided mounting tape. Weather the storm with an IP68 waterproof rating and waterproofed locking DC connectors on all DC cables.
We all like to get our camp setup time down to as little as possible, right? Start saving time this weekend and stick a set of these beauties up on your awning. The Hard Korr 3 Strip Tri-Colour LED Awning Light Kit is your perfect permanent awning partner.
Includes: 3 x 1.3m LED light strips, 1 tri-colour dimmer switch, 1 x 1.5m power lead, 1 x 2.25m 4 pin extension lead, 1 x 3way splitter cable
3300 lumens output
3 colours – bright white, warm white, orange
Smooth dimming function
120° beam angle
Strips can be cut every 5cm to suit
Genuine OSRAM® LEDs
IP68 waterproof rated
Waterproof locking DC connectors
Heavy duty double insulated cables to prevent voltage drop
Low heat output
Low power consumption – 4.32A @ 12V
Colour temperature – 6000K (white)
LED life span 50000 hours
Strong 3M double sided tape
External Dimensions:
120L x 1.3W x 0.4H cm LED Strip
Packed Dimensions:
24W x 24H x 4.5D cm
Weight:
0.58 kg
Cable Length:
1 x 1.5m 12V Lead with Cigarette Adaptor | 1 x 2.25m Extension lead (4 Pin)
Material:
Flexible Plastic
Waterproof:
IP68
Light Source:
High Quality White LED | High Quality Orange LED | 50000 Hour Lifespan
Lumens:
3300 White
Input Power:
12V DC
Power Consumption:
4.32A @ 12V
Suggested Use:
Camping | Touring | Boating
Warranty:
2 Year
Supplier Code:
HKAWNKIT3
Snowys Code:
156475
Reviews
(0)
Q&A's (3)
fiamma caravan awning1 answer
Will these fit inside my fiamma caravan awning when its packed away?
Chris - Port wakefield, SA (3 months ago)
G'day Chris,
They should fit into most awnings, but the Fiama are renowned to be very tight when rolled up. We don't recommend packing them away with these awnings, they're best to pack seperately.
Lauren - Snowys(3 months ago)
Trimmable?1 answer
Hi are these strips able to be cut to length? Thanks
Andrew - Darwin, NT(4 months ago)
G'day Andrew,
They sure are! At short intervals along the light strip, you will see a small line with a scissors symbol. This is your cut point, and you can literally just use scissors - even the basic kind. Hope that helps!
Lauren - Snowys(4 months ago)
Switching between lights1 answer
Hi, would this set up allow the lights to be operated individually or would all three be on at the same time?
Julia - Red Cliffs, VIC(1 year ago)
G'day Julia,
This kit comes with 1 dimmer switch, which means there is a single control point for all three light strips which means they are all controlled at the same time. If you want to set up 2 different strands eg, 1 x light strip, 2 x light strip, you'll need an extra dimmer switch which you can find in the You Might Also Like section. If you wanted to control each of the 3 light strips independently, you'll need 2 extra dimmer switches.