G'day Jared,

Yes this is the correct replacement arm for the Cascade 222 Stove and will fit.

G'day Shane,

It doesn't sorry - the question wasn't misunderstood, but perhaps not answered clearly.
The seal isn't a listed spare part that Coleman sell, but because it's a gas appliance we cant recommend a generic or off the shelf solution incase its not suitable or causes leaks.
In that case its recommended to get in touch with a gas parts specialist to make sure an aftermarket seal is appropriate.

Hope that helps!

G'day Peter,

The regulator arm connects directly to UNEF/BOM disposable propane cannisters.
If you want to connect to a 9kg gas bottle, you'll need the BOM to POL hose which is compatible with POL fittings, and forward compatible with LCC27 fittings.

G'day Bowen,

Yes this will fit as a replacement regulator arm for the Coleman Peak 1 - 2 Burner Stove.

G'day Alexis,

The longest hose available for these Coleman regulator assemblies, and their compatible stoves is 1.5m.

G'day Christine,

The 2 Burner Stove Regulator Assembly is specific to Coleman stoves and is a spare part to replace the supplied regulator if required. This won't suit any other brand of stove, so if you're wanting to connect a small propane cylinder to another branded stove there may be another option. Please send through an email with the stove you have and we can check the options for you.

G'day Dave,

If you're wanting to use a 9kg gas bottle with your 3 Burner Eventemp Stove then you'll just need the Coleman COM/UNEF to POL High Pressure Gas Hose which will connect the regulator arm of your stove to your 9kg gas bottle. I can't say we've ever had to get replacement jets for a 3 Burner Eventemp but it is possible they are available. If you're able to swing us an email we can get in touch with Coleman and see what's available for you.

G'day Peter,

The Coleman regulator arm needs to be attached to the Coleman stove regardless of if you have a green gas canister or a gas hose connected to a gas bottle. This Arm helps to regulate the gas through to the stove - the knobs on the stove will control the flow of gas to the burner rings.

The Coleman High Pressure Gas Hose will do the trick - you can find the link HERE

G'day Rob,

The 2 Burner Stove Regulator Assembly is a fixed regulator so unfortunately, you won't be able to adjust the gas flow rate. 

G'day Steve,

Unfortunately, you won't be able to use this regulator assembly to attach your Weber to a Coleman Propane Gas Bottle. We don't sell Webers but I don't believe you can buy anything that will convert this for you sorry.

G'day Phillip,

When it comes to playing around with any gas parts, we recommend having a chat with a licenced gas technician mate.  Sorry, but none of us at Snowys wish to risk you causing harm to yourself!  Good luck :)

G'day Mick, 

This Regular Assembly is designed for use with Coleman stoves such as the HyperFlame and Eventemp so it's not going to be compatible with Primus brand stoves. If you're after a spare part, it's likely that we would be able to source it for you as a special order - if you'd like us to look into that for you, send us an email at service@snowys.com.au or give us a call on 1300 914 007. 

G'day Michelle,

Good news! The Coleman 2 Burner Stove Regulator Assembly is the exact same part that's used for the Eventemp Stove, so this will suit you fine. 

G'day Alzina,

To connect a 2kg gas bottle to your Coleman 2 Burner Stove Regulator Assembly, you'll need a hose with a 3/8" at one end and BOM fitting at the other. The best one for your needs would be this one by Coleman.