G'day Vicki,

Yes this will work well with the Hard Korr 36W 240V to 12V Transformer, this can power up to a 6-bar light kit so this will provide enough power for the 2-bar light kit to connect to a 240V powerpoint.

G'day Helen,

Unfortunately not.  It would be great, and it's a common request, so I have emailed Hard Korr and passed the feedback on.
Hard Korr has advised their kits come complete from the manufacturer, so they don't even get spare cases on the odd occasion.
Hopefully, it will be something they consider for the future!

G'day Justin,

You'd get away with fitting maybe 2 more, but definitely not 4 extras unfortunately!

G'day Mick,

All of the Hard Korr LED bars have an outlet plug so that extra lights can be added as needed. If you're not wanting to add another bar, then we'd recommend tucking the plug away behind the light bar (depending on how you attach/mount them). There are no cap attachments available for these outlet plugs.

G'day Matthew,

You can absolutely permanently mount the 2 Bar LED 3 Colour Camp Light Kit into your canopy but there are no fixing options for this provided, you'll have to look at a DIY solution for that. If you want to hardwire it in you can, Hard Korr just ask that you do that from the black connection cable side, not the orange connection side. Hope that makes sense.

G'day Paul,

Yes, you can add extra bars into this system with no worries. The orange/white bars will suit, as the new 3 colour dimmer is the key piece in the puzzle to get the warm white colour. The 25cm bars come with no extra cables, while the 48cm bars and 100cm bars come with extra cables and dimmer switches.

G'day Helen,

There aren't any hard and fast rules here, as it will depend on your vehicle's battery age, capacity, and setup of the car. I'm not a mechanic or auto-electrician, but I believe most vehicles need at least 75% battery capacity to start. The 2 bar kit will draw approximately 0.6A per hour, so you'd need to determine your cars battery capacity and work backwards from there for an estimate.

G'day Stephen,

Yes absolutely, you can remove the end red cap and you have a merit plug all ready to use with your merit outlet.

G'day Jess,

These lights are designed to run from a 12V cigarette plug so you'll either need to plug them into your vehicle accessory outlet, or purchase a separate 12V battery. The Companion Portable Power Pack has USB outlets too, however it might be a little over the top for just the lights and phones.

As long as you stick with the Korr brand, you can chain lots of these together, Gene. There does become a point at which there are too many and performance is affected, but you shouldn't reach this point until you have about 6 light bars in the system.

G'day Cath,

I've just called Korr to clarify and they've indicated that to run the two bars independently (i.e. one orange and one white) you would need two dimmers. He said the best value way to do that would be to go for the 4 Bar Orange/White Kit. If you're wanting to run both bars on the 2 Bar Orange/White Kit on the same colour you'll be able to do so on the one dimmer. Hopefully, that clarifies it for you. Let me know if not and maybe we can speak on the phone.

G'day Cath,

You can run one bar orange and one bar white but you'd need to add a white bar to your setup before the dimmer then place the dimmer between the two.